mirror of
https://gitcode.com/waxgourd/addons
synced 2025-12-06 20:38:28 +08:00
1、首次推出ddnsto、mi-scale、mpd、portainer;
2、完善emby及samba-easy-nas的docs及config。
This commit is contained in:
waxgourd
100
mi-scale/DOCS.md
Normal file
100
mi-scale/DOCS.md
Normal file
@@ -0,0 +1,100 @@
|
||||
# 支持的电子秤
|
||||
|
||||
支持类型:
|
||||
Name | Model | Picture
|
||||
--- | --- | ---
|
||||
[Mi Smart Scale 2](https://www.mi.com/global/scale) | XMTZC04HM | <img alt="Mi Scale_2" src="https://raw.githubusercontent.com/lolouk44/xiaomi_mi_scale/master/Screenshots/Mi_Smart_Scale_2_Thumb.png" width="150">
|
||||
[Mi Body Composition Scale](https://www.mi.com/global/mi-body-composition-scale/) | XMTZC02HM | <img alt="Mi Scale" src="https://raw.githubusercontent.com/lolouk44/xiaomi_mi_scale/master/Screenshots/Mi_Body_Composition_Scale_Thumb.png" width="150">
|
||||
[Mi Body Composition Scale 2](https://c.mi.com/thread-2289389-1-0.html) | XMTZC05HM | <img alt="Mi Body Composition Scale 2" src="https://raw.githubusercontent.com/lolouk44/xiaomi_mi_scale/master/Screenshots/Mi_Body_Composition_Scale_2_Thumb.png" width="150">
|
||||
|
||||
急着出，汉化后续调整！！！（冬瓜备注）
|
||||
|
||||
# Setup
|
||||
|
||||
1. Retrieve the scale's MAC address from the [Xiaomi Mi Fit app](https://play.google.com/store/apps/details?id=com.xiaomi.hm.health&hl=en&gl=US), or alternatively, you can also use the `bluetoothctl` tool on Linux and type `scan on` to scan for BLE devices (`sudo hcitool lescan` might also work). The device should be named `MIBFS` or similar.<br/>
|
||||
<img alt="Showing the MAC address in the Xiaomi Mi Fit app" src="https://raw.githubusercontent.com/lolouk44/xiaomi_mi_scale/master/Screenshots/MAC_Address.png" width="250">
|
||||
|
||||
|
||||
1. Open Home Assistant and navigate to the "Add-on Store". Click on the 3 dots (top right) and select "Repositories".
|
||||
2. Enter `https://github.com/lolouk44/hassio-addons` in the box and click on "Add".
|
||||
3. You should now see "Lolouk44 Add-Ons" at the bottom list.
|
||||
4. Click on "Xiaomi Mi Scale", then click "Install".
|
||||
5. Under the "Configuration" tab, change the settings appropriately (at least MQTT parameters, user properties, and MAC address), see [Parameters](#parameters).
|
||||
6. Start the Add-on.
|
||||
|
||||
## Important:
|
||||
If using the Add-On outside of Home Assistant Operating System / through a docker container, make sure the dbus is shared with the container running Home Assistant. This is typically done by adding the following line in your docker run command:
|
||||
`-v /var/run/dbus/:/var/run/dbus/:ro`
|
||||
or the following lines in your docker-compose file:
|
||||
```
|
||||
volumes:
|
||||
- /var/run/dbus/:/var/run/dbus/:ro
|
||||
```
|
||||
|
||||
## Parameters
|
||||
Option | Type | Required | Description
|
||||
--- | --- | --- | ---
|
||||
HCI_DEV | string | No | Bluetooth hci device to use. Defaults to `hci0`
|
||||
BLUEPY_PASSIVE_SCAN | bool | No | Try to set to true if getting an error like `Bluetooth connection error: Failed to execute management command ‘le on’` on a Raspberry Pi. Defaults to `false`
|
||||
MISCALE_MAC | string | Yes | MAC address of your scale
|
||||
MQTT_PREFIX | string | No | MQTT topic prefix, defaults to `miscale`
|
||||
MQTT_HOST | string | Yes | MQTT server, defaults to `127.0.0.1`
|
||||
MQTT_USERNAME | string | No | Username for MQTT server (comment out if not required)
|
||||
MQTT_PASSWORD | string | No | Password for MQTT (comment out if not required)
|
||||
MQTT_PORT | int | No | Port of your MQTT server, defaults to 1883
|
||||
MQTT_DISCOVERY | bool | No | Whether you want MQTT discovery for Home Assistant, defaults to `true`
|
||||
MQTT_DISCOVERY_PREFIX | string | No | MQTT discovery prefix for Home Assistant, defaults to `homeassistant`
|
||||
DEBUG_LEVEL | string | No | Logging level. Possible values: 'CRITICAL', 'ERROR', 'WARNING', 'INFO', 'DEBUG'. Defaults to 'INFO'
|
||||
USERS | List | Yes | List of users to add, see below
|
||||
|
||||
|
||||
Auto-gender selection/config: this is used to create the calculations such as BMI, Water/Bone Mass, etc.
|
||||
Here is the logic used to assign a measured weight to a user:
|
||||
- If the weight is within the range of a user's defined values for GT and LT, then it will be assigned (published) to that user.
|
||||
- If the weight matches two separate user ranges, it will only be assigned to the first user that matched. So don't create overlapping ranges!
|
||||
|
||||
User Option | Type | Required | Description
|
||||
--- | --- | --- | ---
|
||||
GT | int | Yes | Greater Than - Weight must be greater than this value; this will be the lower limit for the weight range of the user
|
||||
LT | int | Yes | Less Than - Weight must be less than this value; this will be the upper limit for the weight range of the user
|
||||
SEX | string | Yes | Gender of the user (male / female)
|
||||
NAME | string | Yes | Name of the user
|
||||
HEIGHT | int | Yes | Height (in cm) of the user
|
||||
DOB | string | Yes | Date of Birth of the user (in yyyy-mm-dd format)
|
||||
|
||||
Note: the weight definitions must be in the same unit as the scale (kg, Lbs, or jin).
|
||||
|
||||
|
||||
# Home Assistant Setup
|
||||
In the `mqtt:` block, enter as many blocks as users configured in your environment variables.
|
||||
If you already have an `mqtt:` and/or `sensor:` block, do not create another one but simply add the "missing" bits under the relevant block header.
|
||||
Note: Only weight entities are automatically added via the MQTT discovery.
|
||||
|
||||
|
||||
```yaml
|
||||
mqtt:
|
||||
sensor:
|
||||
- name: "Example Name Weight"
|
||||
state_topic: "miscale/USER_NAME/weight"
|
||||
value_template: "{{ value_json['weight'] }}"
|
||||
unit_of_measurement: "kg"
|
||||
json_attributes_topic: "miscale/USER_NAME/weight"
|
||||
icon: mdi:scale-bathroom
|
||||
# Below lines only needed if long term statistics are required
|
||||
state_class: "measurement"
|
||||
|
||||
- name: "Example Name BMI"
|
||||
state_topic: "miscale/USER_NAME/weight"
|
||||
value_template: "{{ value_json['bmi'] }}"
|
||||
icon: mdi:human-pregnant
|
||||
unit_of_measurement: "kg/m2"
|
||||
# Below lines only needed if long term statistics are required
|
||||
state_class: "measurement"
|
||||
```
|
||||
|
||||
<img align="center" alt="Example of the Lovelace card in HA" src="https://raw.githubusercontent.com/lolouk44/xiaomi_mi_scale/master/Screenshots/HA_Lovelace_Card.png" width="250"> 🠲 <img align="center" alt="Example of the details of the Lovelace card in HA" src="https://raw.githubusercontent.com/lolouk44/xiaomi_mi_scale/master/Screenshots/HA_Lovelace_Card_Details.png" width="250">
|
||||
|
||||
|
||||
|
||||
# Acknowledgements
|
||||
Thanks to @syssi (https://gist.github.com/syssi/4108a54877406dc231d95514e538bde9) and @prototux (https://github.com/wiecosystem/Bluetooth) for their initial code. Special thanks to [@ned-kelly](https://github.com/ned-kelly) for his help turning a "simple" Python script into a fully fledged Docker container. Thanks to [@bpaulin](https://github.com/bpaulin), [@fabir-git](https://github.com/fabir-git), [@snozzley](https://github.com/snozzley), [CodeFinder2](https://github.com/CodeFinder2) [@MariusHerget](https://github.com/MariusHerget) for their PRs and collaboration.
|
||||
Reference in New Issue
Block a user