mirror of
https://gitcode.com/waxgourd/addons
synced 2025-12-07 04:48:28 +08:00
45 lines
2.5 KiB
YAML
45 lines
2.5 KiB
YAML
configuration:
|
|
address:
|
|
name: Bus Address for KNXD
|
|
description: The KNX address for the knxd deamon itself. Used e.g. for requests originating at the group cache.
|
|
client_address:
|
|
name: Bus Address Pool for KNXD Clients
|
|
description: >
|
|
Address range to be distributed to client connections. Note that the length parameter indicates the number of addresses to be allocated.
|
|
Example: 1.2.3:5 (This assigns addresses 1.2.3 through 1.2.7 to knxd's clients.)
|
|
interface:
|
|
name: Interface Driver
|
|
description: >
|
|
The driver knxd should use as interface to talk to the KNX bus. The most common ones for the typical usecase of this add-on are:
|
|
tpuart (for UART based KNX interfaces, like the one from Busware.de)
|
|
usb (for commercial USB KNX interfaces)
|
|
ipt (for connecting to existing IP tunneling interface)
|
|
device:
|
|
name: Device to use for connection
|
|
description: >
|
|
The physical device address of your adapter in linux.
|
|
You can try leaving this blank in order for knxd to auto-detect your device.
|
|
usb_filters:
|
|
name: usb_filters
|
|
description: When using an USB interface, you can specify additional filters to use. See the filters[https://github.com/knxd/knxd/blob/master/doc/inifile.rst#filters] section of the official knxd documentation.
|
|
custom_config:
|
|
name: Complete custom config
|
|
description: >
|
|
Allows you to write your own, custom knxd ini configuration instead of using the prepared template from this add-on that makes use of all the other config options above.
|
|
Your custom configuration will replace the default configuration provided by this add-on and thus all the other config options above will be ignored. See the knxd documentation for all possible configuration options.
|
|
log_error_level:
|
|
name: KNXD Loglevel
|
|
description: Define the loglevel of knxd.
|
|
ip_address:
|
|
name: Interface IP-Address
|
|
description: IP address the IP based interface should use (only for tpuart-ip, ncn5120-ip and ipt)
|
|
dest_port:
|
|
name: Interface port
|
|
description: network port the IP based interface should use (only for tpuart-ip, ncn5120-ip and ipt)
|
|
connect_device:
|
|
name: connect_device
|
|
description: Device to use for connection,After setting this option, the device option becomes invalid, mainly to solve the problem that the device can only select/dev/ttyUSB0 when there are multiple USBs
|
|
baudrate:
|
|
name: baudrate
|
|
description: baudrate(only for tpuart、ft12、ft12cemi、ncn5120)
|